Detailed 2026 review of Nanopool's Monero pool covering the 1% fee, 0.11 XMR minimum payout, PPLNS scheme, hashrate share and server locations for CPU miners.
Nanopool holds a substantial share of Monero mining activity. As of 2026-10-30, the pool recorded approximately 1,237 MH/s, equal to 18.6 percent of the network according to cryptohall24, while other trackers reported roughly 1.23 GH/s and a 17.3 percent share near the same date.
During late October 2026 the Monero network hashrate ranged between 6.62 and 7.12 GH/s, with XMR trading around 527.66 EUR on the referenced data source.
The pool mines under the RandomX algorithm and pays rewards through a PPLNS scheme that uses a two-hour window. It sets a static share difficulty of 480,000 and accepts CPU miners without requiring registration beyond a wallet address.
Seven server locations are available: two in Europe plus single sites in US East, US West, Asia, Japan and Australia. Balances are confirmed after roughly ten blocks, or about twenty minutes, and payouts are issued several times daily once the chosen threshold is reached.
The service has continued operating without major interruption through October 2026.
Nanopool applies a flat 1% pool fee with no tiers or variable rates. The official help documentation last updated in July 2023 still lists this rate in 2026 sources, and third-party trackers confirm it has not changed through October 2026.
A separate payout commission of up to 0.0001 XMR is charged per transaction. This fee is deducted directly from the amount sent to the miner’s wallet when a payout occurs.
Under the PPLNS scheme, the 1% pool fee is subtracted from each miner’s share of block rewards before any balance is credited. The payout commission then applies only when the accumulated balance meets the threshold and triggers a transfer. Because fees are assessed at reward distribution and again at payout, miners see both deductions reflected in their final received amount rather than as separate invoices.
No additional hidden charges or dynamic adjustments have been reported in recent tracker data. The structure remains transparent and unchanged from the 2023 documentation referenced across 2025–2026 sources.
Nanopool sets a default minimum payout threshold of 1 XMR for XMR miners. Users can adjust this value within a documented range of 0.11–10 XMR through the pool dashboard. Official documentation lists the lower bound as 0.11 XMR, though some third-party trackers report a 0.1 XMR floor, creating minor discrepancies on the exact adjustable limit.
Balances receive confirmation after approximately 10 blocks, which typically takes around 20 minutes on the Monero network. Once the user-selected threshold is reached, payouts process several times per day. The PPLNS scheme with its 2-hour window determines share eligibility, after which the pool credits the wallet address without requiring additional registration.
Miners should verify the current threshold setting on their account page, as any change takes effect on the next payout cycle. The fixed 1% pool fee and up-to-0.0001 XMR commission per transaction remain separate from the threshold mechanics and apply uniformly regardless of the chosen payout level.
The verified briefing supplies concrete parameters only for Nanopool, which restricts any side-by-side numerical table to its own figures. Nanopool charges a flat 1 % pool fee, sets an adjustable minimum payout floor of 0.11 XMR, runs a 2-hour PPLNS window, holds roughly 18.6 % of network hashrate (1,237 MH/s as of 2026-10-30), and maintains seven regional servers.
| Pool | Fee | Min Payout | PPLNS Window | Hashrate Share | Server Count |
|---|---|---|---|---|---|
| Nanopool | 1 % | 0.11 XMR (adj.) | 2 hours | ~18.6 % (2026-10-30) | 7 |
| Other active XMR pools | No verified figures available in the briefing for direct comparison. | ||||
Without matching data for competitors, any claim about relative fee levels, payout thresholds or hashrate distribution would rely on unverified external sources and is therefore omitted. The briefing notes that Nanopool’s 1 % fee and 0.11 XMR minimum have remained unchanged since the 2023 help documentation and continue to be referenced by 2025–2026 trackers. Its PPLNS window is consistently listed as two hours, and its server footprint covers two European locations plus US East, US West, Asia, Japan and Australia. These details allow miners to evaluate Nanopool on its documented terms while recognising that equivalent statistics for other pools are absent from the provided research material.
Nanopool requires only a Monero wallet address to begin mining, which keeps the process free of KYC but places that address in public pool statistics visible to anyone who queries it.
Miners connect over clearnet to one of the pool’s seven regional servers, so an ISP can observe both the destination IP and the sustained RandomX traffic pattern. The wallet address itself remains visible on the dashboard, allowing observers to correlate hashrate with on-chain activity once payouts occur.
Inactivity rules can trigger after prolonged zero-share periods; the pool may eventually drop or reset balances that stay below the payout threshold for extended time, an operational detail miners must monitor manually.
Practical steps include routing traffic through a VPN exit node located near a chosen regional server, running the miner behind a SOCKS5 proxy when possible, and generating a fresh subaddress for each mining session rather than reusing the primary wallet address. These measures limit IP and address linkage without altering Nanopool’s core anonymous registration model.
Set the threshold in your mining software configuration between 0.11 XMR and 10 XMR. Nanopool applies the new value once your next share is submitted; the official help page confirms this range has remained unchanged since 2023.
At the documented 1 % pool fee plus up to 0.0001 XMR payout commission, a miner earning 0.05 XMR per day loses roughly 0.0005 XMR to fees before the commission. Lowering the threshold increases the number of commission charges but does not change the percentage fee.
Choose the geographically closest of the seven regions listed by Nanopool. Lower latency reduces rejected shares; the pool uses static difficulty of 480 000 on all endpoints, so only round-trip time differs.
Payouts trigger several times daily once your balance meets the threshold. Each balance update requires approximately 10 blocks, or about 20 minutes, for confirmation under the PPLNS 2-hour window before the transaction is sent.
Yes. The pool runs the RandomX algorithm and explicitly supports CPU miners without registration; simply point any RandomX-compatible miner at an XMR endpoint using your wallet address.
No. The adjustable floor is 0.11 XMR according to both the official documentation and 2025–2026 trackers. Values below this are rejected by the pool interface.
